Should I always keep the bms ribbon cable connected except for storage?

NoelBlakley
Nouveau membre !!!
Nouveau membre !!!
Messages : 4
Enregistré le : 26 juin 2018, 16:41

Should I always keep the bms ribbon cable connected except for storage?

Message non lu par NoelBlakley » 03 juil. 2018, 16:00

Hello,

I bought a 36v 15ah lipo 4 battery a few months ago and I have been doing a little charging here and there because I havent used it that much. The last time I charged it I saw all led's solid except for one. Is that a problem?

I also just read that the sensor wire(?) should be disconnected during longer periods of storage/inactivity. By sensor wire are they talking about disconnecting the grey data ribbon? I have heard that this is stated in the papers/pdf you get when you get the battery. I did not see it but i don't doubt it is there somewhere.

Should I always keep the bms ribbon cable connected except for storage?

Please help

I didn't find the right solution from the internet.

References:
https://endless-sphere.com/forums/viewtopic.php?t=36265
Startup video company

Thanks.

Should I always keep the bms ribbon cable connected except for storage?

Publicité

Publicité
 

Répondre